[Good Wolf]

Here are some pics of the filter. Please let me know if you can identify it, and if you have an clue how to properly set it up. Any ideas on how to get the water out off the filter compartments without filling the entire tank up?







Here is the pump and air stone that was inside of the filter box. The air stone was in the small compartment on the right, and the pump was placed inside one of the filters in the left compartment.





As you can see the wood trim above the filters is in bad shape. Do you think it would be a good idea to sand it down?

Here is a pic of the corner of the trim. I'm thinking about just putting some touch up paint on it.



Here is a pic of the covers, an 'extra pump', and some rocks he gave us. This pic is actually of the underside of the tops. The tops of them are wood, and probably also need to be sanded down.



Here is a pic of where the light balast is suppossed to go. I'm not quite sure if I'm going to be able to fit a standard ballast in there and still be able to put the lids on.


Your advice is very much appreciated.