over flow help...

predator · 03-17-2008, 04:32 PM

i want to drill my 10 gal so that i cant do an overflow and i was wondering how large of an outlet tube i would need...

also based on the size i need how much space do i need under the tank if i came out of the bulkhead directly into a 90 degree elbow...

I currently have the 10 gal on a counter and im gonna build a small platform for it to sit on and i just want to make sure i build a high enough platform that it will all clear once i set it all up...

-me

CollegeReefer · 03-17-2008, 10:29 PM

I think half inch would be plenty for a 10 gallon

**TheOldSalt** · 03-18-2008, 04:34 PM

Nuts. There's a chart for this somewhere on a popular DIY site, but I can't remember where at the moment. Anyway, CR is right; any pump you'd likely be using on a 10-gal should be able to use a 1/2" just fine.

03-17-2008, 04:32 PM	#1
predator Pirates get all the booty Join Date: Jan 2005 Location: Little Rock, AR Age: 25 Posts: 229 User Feedback: (0)	over flow help... i want to drill my 10 gal so that i cant do an overflow and i was wondering how large of an outlet tube i would need... also based on the size i need how much space do i need under the tank if i came out of the bulkhead directly into a 90 degree elbow... I currently have the 10 gal on a counter and im gonna build a small platform for it to sit on and i just want to make sure i build a high enough platform that it will all clear once i set it all up... -me __________________ He spoke with the wisdom that can only come from experience, like a guy who went blind because he looked at a solar eclipse without one of those boxes with a pinhole in it and now goes around the country speaking at high schools about the dangers of looking at a solar eclipse without one of those boxes with a pinhole in it.

03-17-2008, 10:29 PM	#2
CollegeReefer Senior Member Join Date: Sep 2006 Location: Stevens Pont, Wisconsin Age: 22 Posts: 391 User Feedback: (0)	I think half inch would be plenty for a 10 gallon __________________ CollegeReefer

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Question about water flow from filter	dm800	General Freshwater	3	12-21-2007 05:51 PM
gyre flow	Bear	General Saltwater	2	08-19-2007 12:30 AM
much less flow seems better	Bear	General Saltwater	4	08-18-2007 11:48 PM
Lily flow?	Zoe	General Freshwater	0	06-10-2007 04:49 AM
Water Flow	Bear	General Saltwater	14	01-12-2007 08:59 PM

Members currently in the Chat:0
	Users In Chat Room: There are several users in chat now! Don't Be Shy - click here and come on in!

03-18-2008, 04:34 PM	#3
TheOldSalt Darth Ichthyos Join Date: Jan 2005 Posts: 4,082 User Feedback: (5)	Nuts. There's a chart for this somewhere on a popular DIY site, but I can't remember where at the moment. Anyway, CR is right; any pump you'd likely be using on a 10-gal should be able to use a 1/2" just fine.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)